Stoutagri Agriculture and Animal Husbandry Equipment Co.,Ltd
Products
[[TD-Hot Products]]
Knowledge
Home > Knowledge > Content

How to properly install the chicken nipple drinker?


With the acceleration of modern chicken raising technology, the automatic chicken water supply system (nipple drinker) has been widely used. Many farmers choose the nipple drinker as the water supply system. The nipple drinker has the advantages of satisfying the chicken drinking water, saving labor, saving water, improving drinking water hygiene, etc., thereby improving the economic benefits of raising chickens. However, in the process of using nipple drinkers, most chicken farms often encounter various problems due to unreasonable installation methods, which affect the production of chickens and the normal drinking water of chickens. In addition to the overall requirements when installing the nipple drinker, the rationality of the nipple drinker installation should be ensured according to the different production stages of the chicken and the specific requirements.


1 General requirements for installing a nipple drinker

The installation of the nipple drinker should be standardized and reasonable to ensure that the water pipe is straight and ensure that the water supply in each section of the water pipe is even. A water filter should be installed at the inlet of the water pipe to prevent foreign matter from entering the drinking water system to block the drinker and pollute the water.

The drinking nipple should be installed vertically downwards to avoid water leakage and to meet the drinking habits of the chickens.

According to the number of layers in the chicken coop, a pressure-controlled water tank should be installed at the inlet end of each layer of the chicken cage to ensure uniform water pressure in each section of the water pipe. The end of the water pipe should be equipped with a plug that can open the water pipe flexibly, so that the water pipe can be opened at any time to release foreign matter or deteriorated water in the water pipe.

When installing the drinking nipple, the drilling of the drinking water pipe must be round and smooth, so that the drinking nipple and the drinking water pipe are in close contact to ensure no water leakage.

The drinking nipple should be installed in the middle of the cage cage. It should not be close to one side. Otherwise, the drinking water pipe will be deformed due to temperature changes (thermal expansion and contraction), causing the chicken cage wire to push the drinking nipple, resulting in drinking nipples and drinking water pipes. Do not get in close contact and leak water.


2 Specific requirements for installing a nipple drinker

2.1 Installation of chick nipple drinker

During the brooding period, the nipple drinker should be installed in a place that is obvious and easy for the chick to find, so that the chick can find the drinking nipple in time and drink water. According to the habit of drinking water from the head of the chicken, the drinking nipple should be installed above the body of the chicken.

The chicks grow fast during the brooding period. When installing the drinking nipples, there should be room for adjustment. According to the growth of the chickens, the height of the drinking nipples can be adjusted at any time to ensure the normal drinking water of the chickens and to meet the drinking habits of the chickens. Prevent the nipple from being too low, the phenomenon that the chicken is easy to touch the nipple and leak water, the nipple is too high, the chick can not reach the drinking nipple and can not drink water, affecting the normal growth and health of the chick.

Determine the number of drinking nipples to be installed based on the number of birds. In the chick stage, the number of chickens per cage is large. It is necessary to install as many drinking nipples as possible in each cage, which is conducive to the first drinking water training of the chicks, to meet the drinking water needs of the chicks, to prevent the chickens from rushing into the water and crushing the chickens.

2.2 Installation of young chicken nipple drinker

Young chickens grow fast, and should pay attention to the installation height of the drinking nipples, leaving a large adjustable space to adjust the height of the drinking nipples according to the growth of the birds. Young chicken drinking nipples are usually installed above the trough in front of the cage. The direction of the drinking nipple should be slightly inclined 10 degrees into the cage. This can not only facilitate the drinking water of the chickens, but also prevent the drinking water from falling into the trough and causing the fermentation to deteriorate.

2.3 Installation of laying nipple nipple drinker

The laying nipple drinker should be installed in front of the top of the cage. This can satisfy the chicken's drinking habits. The height of the laying hens meets certain requirements. The chickens are prone to water leakage when they are exposed to the drinking nipples, which causes the chickens to be wet for a long time, which is not conducive to the chickens themselves cleaning. Therefore, the laying nipple of the laying hen should be installed between two adjacent cages, and the activity of the chicken is not easy to touch, thereby reducing the probability of water leakage. At the same time, each chicken in the chicken cage has 2 drinking nipples to drink water, which improves the safety of drinking water for the chickens. The drinking nipples should not be too close to the trough. When the birds drink water, the water easily falls into the trough, causing the feed to ferment and deteriorate, which affects the health of the chickens.


  • Company Profile
    Stoutagri Agriculture and Animal Husbandry Equipment Co., Ltd. is located in the city Qingdao of China, which enterprise specializing in the research, development and production for livestock breeding equipment. Product series cover the drinking system, feeding system, flooring system and transportation system for pig, cattle, sheep and poultry, etc. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world....
  • Product Category
  • Contact Us
    Address:No. 687, Middle Road, Heilongjiang Chengyang District of Qingdao City, Shandong
    Tel: +86-532-67766861
    Fax: +86-532-80960762
Copyright © Stoutagri Agriculture and Animal Husbandry Equipment Co.,Ltd All Rights Reserved.