وصلة موصل السلسلة لأنظمة تغذية الخنازير
ال وصلة موصل السلسلة لأنظمة تغذية الخنازير is a small but essential component used to join separate sections of chain disks within automatic pig feeding systems. It creates a secure mechanical connection between chain assemblies, allowing the feed transport line to operate continuously throughout the feeding circuit.
Manufactured from galvanized 20Mn2 steel, the connector combines mechanical strength with good corrosion resistance for demanding livestock environments. Its Ø8 mm design is matched for use with Ø60 mm chain disk feeding systems and supports straightforward installation during system assembly, صيانة, or chain replacement.
المواصفات الفنية
| غرض | مواصفة |
| رقم المنتج. | 142411 |
| مادة | Galvanized 20Mn2 Steel |
| Connector Diameter | Ø8 mm |
| Compatible System | Ø60 mm Chain Disk Feeding System |
| طلب | Connecting individual Chain Disk sections |
الميزات الرئيسية
- Manufactured from galvanized 20Mn2 steel for durability.
- Provides a secure connection between chain disk sections.
- Compatible with Ø60 mm automatic pig feeding systems.
- Simple structure allows quick installation during maintenance.
- Suitable for both new system assembly and replacement of worn connectors.
- Supports continuous feed transportation through connected chain sections.
تطبيقات المزرعة
This connector link is commonly used in automatic feeding systems installed in:
- Sow farms
- بيوت الخنازير الحضانة
- حظائر المزارع والتشطيب
- مرافق إنتاج الخنازير التجارية
- Feed conveying line maintenance and system expansion projects
It is suitable wherever individual chain disk sections must be connected to create a continuous feed transport loop.
نصائح التثبيت
- Verify that the connector matches the chain specification before installation.
- Inspect chain sections for wear before joining new connectors.
- Ensure the connector is fully secured to maintain smooth chain movement.
- بعد التثبيت, manually rotate the chain to confirm free movement before operating the feeding system.
صيانة & نصائح التنظيف
- Inspect connector links during routine feeding system maintenance.
- Replace connectors showing excessive wear, تشوه, أو التآكل.
- Check chain tension regularly to reduce unnecessary stress on connection points.
- Keep the feeding pipeline clean to help minimize operating resistance.
التعليمات
What does the connector link connect?
It joins individual قرص السلسلة sections, creating one continuous feed transport chain.
Can the connector be replaced without replacing the entire chain?
نعم. Individual connector links can be replaced during routine maintenance if they become worn or damaged.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español









