منصات التبريد
High temperatures can reduce feed intake, growth performance, and animal comfort in modern livestock production. Cooling Pads are widely used in pig farms and poultry houses to lower barn temperature through evaporative cooling.
The system operates by drawing outside air through wet cellulose pads while مراوح العادم create negative pressure inside the building. As water evaporates from the pad surface, the incoming air temperature decreases before entering the animal house.
StoutAgri Cooling Pads are manufactured using corrugated cellulose paper with a honeycomb structure that provides a large evaporation area while maintaining low airflow resistance. The pads are suitable for tunnel-ventilated pig barns, broiler houses, breeder farms, and layer operations.
Two pad configurations are available. نموذج 7090 offers excellent cooling efficiency and is widely used in high-temperature regions. نموذج 7060 provides lower air resistance and is suitable for projects requiring increased ventilation capacity.
المواصفات الفنية
| غرض | نموذج 7090 | نموذج 7060 |
| ارتفاع (ح) | 1500 / 1800 / 2000 مم | 1500 / 1800 / 2000 مم |
| عرض (دبليو) | 600 مم | 600 مم |
| عمق (د) | 150 مم | 150 مم |
| Flute Height (ح) | 7 مم | 7 مم |
| Angle α | 45° | 45° |
| Angle β | 45° | 15° |
| لون | بني | بني |
الميزات الرئيسية
- Honeycomb structure provides a large evaporation surface.
- Suitable for continuous operation in modern livestock houses.
- Uniform air distribution across the cooling wall.
- Available in two airflow configurations to suit different climate conditions.
- Modular dimensions simplify transportation and installation.
- Compatible with tunnel ventilation and negative pressure systems.
- Helps improve animal comfort during periods of heat stress.
تطبيقات المزرعة
- Pig finishing barns
- Gestation and breeding houses
- مزارع الدجاج اللاحم
- منازل الطبقة
- مرافق تربية الدواجن
- Tunnel ventilation systems
- Large-scale livestock houses in hot climates
نصائح التثبيت
- Install the pads on the air inlet side of the building opposite the مراوح العادم.
- Ensure the supporting frame remains level and watertight.
- Maintain uniform water distribution across the entire pad surface.
- Select pad length according to barn ventilation calculations.
- Install adequate drainage to prevent water accumulation.
For best cooling performance, the cooling wall should operate together with properly sized exhaust fans and automatic controllers.
صيانة & نصائح التنظيف
- Inspect the water distribution system regularly.
- Flush the circulation tank periodically to remove sediment.
- Remove dust and debris from the pad surface when necessary.
- Check for water leakage and uneven wetting.
- Drain the system during long periods of non-use.
التعليمات
What is the difference between Model 7090 and Model 7060?
نموذج 7090 generally provides higher cooling efficiency, while Model 7060 offers lower airflow resistance and increased ventilation capacity.
Can the pad dimensions be customized?
The standard width is 600 mm with heights of 1500 مم, 1800 مم, و 2000 مم. Different cooling wall lengths can be assembled according to project requirements.
How often should the pads be cleaned?
The cleaning frequency depends on water quality and environmental conditions. Regular inspection is recommended during the cooling season.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español









