شارب الحلمة منقار البط للخنازير
Providing reliable access to clean drinking water is essential during the nursery phase. The Duck-Bill Nipple Drinker for Piglets is developed for weaned pigs and small nursery animals that require a lower drinking height and moderate water flow.
مصنوعة من الفولاذ المقاوم للصدأ, this drinker is suitable for modern pig production systems where durability, صحة, and ease of installation are important considerations. Its duck-bill style drinking mechanism is commonly used in nursery facilities to support comfortable drinking behavior for young pigs.
المواصفات الفنية
| غرض | مواصفة |
| رقم المنتج. | 100105 |
| مادة | 201 الفولاذ المقاوم للصدأ / 304 الفولاذ المقاوم للصدأ |
| طول | 65 مم |
| اتصال | 1/2″ Thread × 3/8″ Body |
| ضغط الماء الموصى به | 0.1-0.25 ميجا باسكال (15-36 رطل لكل بوصة مربعة) |
| معدل التدفق الموصى به | 0.6–1.0 L/min |
| فئة الخنازير | الفطام / Small Nursery |
| وزن الخنزير | 5-15 كجم |
| ارتفاع التثبيت الموصى به | 15–25 cm (6″–10″) من الأرض |
| زاوية التثبيت الموصى بها | 15°–30° Downward |
الميزات الرئيسية
- هيكل من الفولاذ المقاوم للصدأ متوفر في 201 و 304 grades
- Designed specifically for nursery and weaner pigs
- مدمج 65 mm body for easy installation
- Controlled flow rate suitable for young animals
- Standard threaded connection fits common drinking lines
- Suitable for automatic piglet watering systems
تطبيقات المزرعة
- أقلام الحضانة
- Weaner accommodation
- Piglet rearing facilities
- أنظمة الشرب الأوتوماتيكية
- مزارع الخنازير التجارية
نصائح التثبيت
Install the drinker at a downward angle between 15° and 30°.
The recommended mounting height is 15–25 cm from the floor. The final position should allow piglets to activate the drinker naturally without excessive stretching.
للحصول على أفضل النتائج:
- خطوط المياه دافق قبل التثبيت
- Check all threaded connections
- Verify operating pressure after installation
- Test water flow before introducing animals
صيانة & نصائح التنظيف
تشمل ممارسات الصيانة الموصى بها:
- Check drinkers for leakage during routine inspections
- Remove mineral deposits if present
- Clean surrounding areas regularly
- Monitor water flow consistency
- استبدل المكونات البالية عند الضرورة
Routine maintenance is generally simple and helps support long-term service life.
التعليمات
ما هو ضغط الماء الموصى به?
The recommended operating pressure is 0.1–0.25 MPa (15-36 رطل لكل بوصة مربعة).
يكون 304 الفولاذ المقاوم للصدأ متاح?
نعم. كلاهما 201 الفولاذ المقاوم للصدأ و 304 تتوفر إصدارات الفولاذ المقاوم للصدأ.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español













