أداة وضع علامة الأذن للماشية
The Livestock Ear Tag Applicator is a manual ear-tagging tool for applying standard TPU two-piece livestock ear tags. Its lever-action design combines a die-cast aluminum alloy body with a stainless steel applicator needle for controlled positioning during tagging.
ال 240 mm applicator uses an automatic spring-back mechanism to return the handles after each operation. The coated metal body also provides a practical surface finish for routine use in livestock handling areas.
المواصفات الفنية
| مواصفة | تفاصيل |
| رمز المنتج | 253802 |
| نوع المنتج | Heavy-Duty Ear Tag Plier / Applicator |
| التعامل مع المواد | High-Strength Die-Cast Aluminum Alloy |
| Pin/Punch Material | Stainless Steel Applicator Needle |
| Overall Length | 240 مم |
| المعالجة السطحية | Powder Coating / Spray-Coated Anti-Rust Finish |
| Operation Mode | Manual Lever-Action with Automatic Spring-Back Mechanism |
| Applicable Ear Tags | Standard TPU Two-Piece Livestock Ear Tags |
الميزات الرئيسية
- Lever-action operation: The manual lever mechanism provides controlled movement during ear-tag application.
- Stainless steel applicator needle: The needle provides a durable contact point for positioning and piercing the ear tag.
- Automatic spring-back: The applicator returns to its open position after operation, supporting repeated tagging work.
- Aluminum alloy construction: The die-cast aluminum body provides a rigid structure while keeping the tool suitable for manual handling.
- Coated surface: Powder coating or spray coating helps protect the applicator body against routine exposure to wet and dirty livestock environments.
تطبيقات المزرعة
The applicator is commonly used during livestock identification and routine animal processing. It is suitable for farms, livestock handling areas, and other operations using standard TPU two-piece ear tags.
The tool can be matched with compatible two-piece ear tags for cattle, العجول, الخنازير, غنم, الماعز, and other livestock according to the selected ear-tag design. For consistent application, operators should use the applicator with the corresponding tag type and follow the tag manufacturer’s recommended positioning procedure.
نصائح التثبيت
Before tagging, check that the applicator needle and ear-tag components are correctly aligned. The ear tag should sit securely in the applicator before the operator performs the tagging action.
في الممارسة العملية, the ear should be positioned correctly and handled calmly to avoid unnecessary movement during application. After tagging, check that the male and female components have engaged correctly and that the tag remains properly positioned.
صيانة & نصائح التنظيف
Clean the applicator after routine tagging work to remove dirt, hair, and other material around the needle and moving mechanism. Keep the stainless steel needle clean and inspect it regularly for bending or physical damage.
Check the spring-back mechanism and moving joints during routine maintenance. If the tool becomes difficult to operate or the needle no longer aligns correctly, stop using it until the applicator has been inspected.
Store the applicator in a clean, مكان جاف عند عدم الاستخدام. Avoid using excessive force if a tag does not align correctly; first check the compatibility and positioning of the ear tag.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español








