عوارض دعم ثلاثية لشرائح الخنازير
Triangular Support Beams for Pig Slats form the structural base beneath plastic slatted flooring in nursery and farrowing facilities. Unlike conventional rectangular supports, the triangular profile encourages manure to move naturally toward both sides of the beam, helping keep the manure pit clear while reducing accumulation around the support structure.
The wide bottom contact surface increases stability on the concrete foundation and provides strong resistance to lateral movement during daily livestock activity. Available in four beam heights, these fiberglass support beams allow farm builders to select an appropriate configuration according to flooring span, manure pit depth, كثافة التخزين, and housing type.
They are commonly installed together with شرائح الخنازير البلاستيكية to create durable, hygienic flooring systems for modern pig production.
المواصفات الفنية
| غرض | مواصفة |
| رقم المنتج. | 155911 / 155912 / 155913 / 155914 |
| مادة | الألياف الزجاجية |
| Profile | Triangular |
| الارتفاعات المتوفرة | ارتفاع 100 ملم, الارتفاع 120 ملم, H135 mm, H150 mm |
| الميزة الهيكلية | Wide base with high anti-tip stability |
| Manure Flow Design | Triangular profile allows manure to slide naturally to both sides |
| التطبيق الموصى به | حظائر الحضانة, منازل ترعي, sow transition areas |
| Recommended Slat Sizes | See matching guide below |
Recommended Matching Plastic Slats
| Beam Height | Recommended Plastic Slats |
| ارتفاع 100 ملم | 600 × 300 مم, 600 × 400 مم |
| الارتفاع 120 ملم | 600 × 400 مم, 600 × 500 مم |
| H135 mm | 600 × 500 مم, 600 × 600 مم |
| H150 mm | 600 × 600 مم (Heavy Duty), 600 × 400 مم (Sow Side) |
الميزات الرئيسية
- Fiberglass construction offers long-term resistance to moisture and typical livestock housing conditions.
- Triangular beam design promotes natural manure movement toward both sides of the manure pit.
- Wide contact surface improves structural stability and helps prevent beam overturning.
- Four beam heights accommodate different manure pit depths and flooring spans.
- متوافق مع شائعة الاستخدام شرائح الخنازير البلاستيكية in nursery, فطم, and farrowing facilities.
- Simple beam profile allows efficient installation during new construction or floor replacement projects.
تطبيقات المزرعة
Different beam heights support different building layouts and production requirements.
- ارتفاع 100 ملم is typically used in standard nursery pens with shorter flooring spans.
- الارتفاع 120 ملم suits standardized commercial nursery barns and is commonly selected for modern pig farms.
- H135 mm is generally recommended for deeper manure pits or high-density nursery facilities where greater manure storage capacity is required.
- H150 mm is suitable for extra-long spans or sow transition areas where additional structural support is needed.
Selecting the appropriate beam height helps optimize floor stability while matching the structural requirements of the manure pit and plastic flooring system.
نصائح التثبيت
- Install the beams on a level concrete foundation before positioning plastic slats.
- Select the beam height according to manure pit depth, flooring span, and livestock category.
- Match the beam with the recommended slat dimensions to achieve proper floor support.
- أثناء التثبيت, maintain consistent beam spacing across the entire flooring system to ensure even load distribution.
- Inspect beam alignment before locking the plastic slats into place.
صيانة & نصائح التنظيف
- Periodically inspect beams during routine barn maintenance for mechanical damage or movement.
- Remove any debris that may accumulate around the beam base during facility cleaning.
- Check the stability of the supporting foundation if flooring sections are replaced.
- Replace damaged flooring components promptly to maintain proper structural support.
التعليمات
Can one beam height be used for every pig house?
Not always. Different beam heights are designed for different flooring spans, manure pit depths, and housing layouts. Selecting the correct height improves structural performance.
Are these beams compatible with plastic pig slats?
نعم. Each beam height is recommended for specific plastic slat sizes to provide appropriate floor support.
Why use a triangular beam instead of a flat support?
The triangular profile allows manure to slide naturally toward both sides while the wide base improves stability and resistance to tipping.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español









