Poutres de support pour les lattes de volaille
Support Beams for Poultry Slats form the load-bearing framework beneath raised plastic poultry flooring. The beams use a hollow triangular PVC profile with a vertical rib extension to support slat panels while maintaining a practical structural layout.
The larger W42 × H120 mm profile is intended for primary load-bearing frameworks, while the W36 × H90 mm profile is commonly used for light-to-medium load floors, zones de couvaison des poussins, and pullet rearing platforms.
Spécifications techniques
| Code produit | Description | Matériel | Profile Dimensions | Longueur | Cross-Section Profile | Couleur | Application |
| 454501 | Heavy-Duty Triangular PVC Support Beam | Rigid Virgin PVC | W42 × H120 mm (1.65″ × 4.72″) | Personnalisé | Hollow triangular base with vertical rib extension | Light Grey | Primary framework for raised poultry slat floors for broilers, couches, éleveurs, et des canards |
| 454502 | Medium Triangular PVC Support Beam | Rigid Virgin PVC | W36 × H90 mm (1.42″ × 3.54″) | Personnalisé | Hollow triangular base with vertical rib extension | Light Grey | Support framework for light-to-medium load poultry floors, zones de couvaison des poussins, and pullet rearing platforms |
Principales fonctionnalités
- Two profile sizes allow selection according to the intended poultry floor application.
- The hollow triangular base creates a defined structural support profile beneath raised slat flooring.
- The vertical rib extension forms part of the beam profile and supports integration into the floor framework.
- Rigid virgin PVC provides a consistent material specification for poultry floor construction.
- Customized beam lengths allow the support layout to match different house widths and project designs.
Applications agricoles
These support beams are commonly used as part of raised systèmes de plancher pour volailles where plastic slat panels require a supporting framework underneath.
The W42 × H120 mm beam is intended for primary load-bearing frameworks in broiler, couche, éleveur, and duck housing. The W36 × H90 mm version is suitable for light-to-medium load floor sections, including chick brooding and pullet rearing platforms.
Conseils d'installation
Install the support beams according to the planned floor layout and ensure that the supporting structure remains level before fitting the slat panels. En pratique, installers typically determine beam spacing and support arrangement according to the floor design and project requirements.
Use the appropriate beam profile for the intended application rather than applying one profile to every floor section. Customized lengths should be confirmed before cutting or assembling the support framework.
Entretien & Conseils de nettoyage
Inspect the support framework during routine floor maintenance, especially in areas subject to frequent washing or heavy poultry traffic. Remove accumulated manure and debris from accessible structural areas to maintain clean conditions beneath the slatted floor.
Check that slat panels remain properly supported and that the overall framework stays aligned. When replacing individual floor sections, inspect the corresponding support beams before reinstalling the panels.
FAQ
Which beam should be used for heavier poultry floor applications?
The W42 × H120 mm profile is specified for primary load-bearing frameworks serving broilers, couches, éleveurs, et des canards.
Can the beam length be supplied to match a specific poultry house layout?
Oui. Both support beam types can be supplied in customized lengths according to project requirements.
Can these beams be used for chick and pullet flooring?
Oui. The W36 × H90 mm profile is specified for light-to-medium load poultry floors, including chick brooding areas and pullet rearing platforms.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español







