Poutres de support pour plancher à lattes en mouton
Support Beams for Sheep Slatted Flooring provide the structural framing required beneath plastic slatted floors in sheep and goat pens.
The beams use continuous fiberglass strand and acid-resistant resin through a pultrusion process. Their triangular profile reduces the upper surface area where manure can accumulate while providing vertical structural depth for floor framing.
Spécifications techniques
| Code produit | Description | Matériel | Profile Height | Longueur | Application |
| 155911 | 100 mm Triangular FRP Support Beam | Continuous fiberglass strand & acid-resistant resin pultrusion | 100 mm | Cut to requirements | Floor support framing for plastic goat slatted floors |
| 155912 | 120 mm Heavy-Duty Triangular FRP Support Beam | Continuous fiberglass strand & acid-resistant resin pultrusion | 120 mm | Cut to requirements | Heavy-duty floor support framing for high-span goat pens |
Principales fonctionnalités
Triangular Profile Structure
The triangular cross-section provides vertical structural depth while limiting the horizontal surface available for manure accumulation.
Corrosion Resistance
FRP construction does not rust and resists moisture and harsh farm environments. The supplied material specification uses acid-resistant resin, supporting long-term use in livestock housing conditions.
Two Structural Options
Le 100 mm profile suits standard plastic slatted-floor framing, tandis que le 120 mm version is intended for heavy-duty support in high-span goat pens. This gives project designers two height options without changing the basic FRP support concept.
High Weight-to-Strength Ratio
The fiberglass-reinforced structure combines low weight with high tensile and flexural strength. En pratique, the lower handling weight can simplify positioning and assembly during floor installation.
Applications agricoles
Les applications typiques incluent:
- Sheep housing with raised planchers à lattes en plastique
- Goat pens using plastic slatted flooring
- Breeding and fattening areas
- High-span goat pen structures
- New livestock building construction
- Plastic slatted-floor retrofit projects
When selecting beam length and spacing, the complete floor structure should be considered rather than treating the beam as an independent load-bearing component.
Conseils d'installation
Install the beams on a properly prepared and level support structure. En pratique, the support arrangement should match the dimensions and interlocking layout of the selected plastic slats.
Before final installation, confirm the required beam lengths from the actual pen dimensions. The supplied beams can be cut to project requirements, which allows the floor framing to follow the planned pen layout.
For projects using the 120 mm heavy-duty profile, verify the complete support arrangement and span requirements before installation. The beam should work together with the compatible slatted-floor system rather than carrying loads outside its intended floor-support application.
Entretien & Conseils de nettoyage
FRP support beams generally require less maintenance than steel members because they do not rust. Cependant, routine inspection remains appropriate in livestock housing.
- Check exposed beam areas during routine floor inspections.
- Remove accumulated manure where it affects access or drainage around the support structure.
- Inspect beam positioning after floor maintenance or structural work.
- Check the support arrangement if slatted panels show movement or unevenness.
- During high-pressure cleaning, clean the surrounding floor-support area thoroughly to reduce manure accumulation.
Chemical cleaning procedures should follow the requirements of the complete livestock flooring system and the cleaning chemicals used on the farm.
FAQ
Which beam height should I use for a sheep or goat floor?
Le 100 mm profile is intended for standard floor support framing. Le 120 mm profile is designed for heavy-duty support in high-span goat pens. Final selection should follow the project’s floor layout and support requirements.
Can the FRP beams be supplied in different lengths?
Oui. Both product versions are specified with lengths cut to requirements, allowing them to be prepared according to the project dimensions.
Are these beams suitable for plastic slatted flooring?
Oui. The product is designed as floor support framing for plastic goat and sheep slatted floors.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español






