Angolo a 90 ° in acciaio inossidabile per sistema di alimentazione suina
The Stainless Steel 90° Corner for Pig Feeding System is a routing component used in automatic pig feeding systems where the feed pipeline needs to change direction. It allows the disc chain to pass through a 90-degree turn while maintaining continuous feed transport.
Prodotto da 304 acciaio inossidabile, the corner provides good resistance to moisture, feed dust, and daily cleaning conditions commonly found in pig houses. It is designed for compatibility with Ø60 mm disc feeding line systems and can be integrated into new installations or replacement projects.
This component is commonly used when feed lines must follow the building layout around walls, colonne, or equipment while maintaining an efficient feeding route.
Specifiche tecniche
| Articolo | Specifiche |
| Prodotto n. | 143101 |
| Materiale | 304 Acciaio inossidabile |
| Dimensioni | L 350 × L 350 mm |
| Geometria | 90° Angolo |
| Linea di alimentazione compatibile | Sistema di alimentazione a disco Ø60 mm |
Caratteristiche principali
- Prodotto da 304 stainless steel for long-term corrosion resistance.
- Progettato specificatamente per sistemi di alimentazione a disco Ø60 mm.
- Provides a smooth 90-degree transition for disc chain movement.
- Supports flexible routing in automatic feeding installations.
- Suitable for both new system construction and replacement of existing corner sections.
- Simple structure with minimal maintenance requirements.
Applicazioni agricole
- Sow barns
- Gestation houses
- Unità di parto
- Casette per suini da svezzamento
- Grower and finisher buildings
- Feed lines installed around structural columns or building corners
A complete feeding line also includes a properly matched Unità di azionamento for Pig Feeding System.
Suggerimenti per l'installazione
- Confirm compatibility with Ø60 mm feeding pipes before installation.
- Install the corner section securely to maintain proper alignment with adjacent pipe sections.
- Ensure the disc chain moves freely through the corner before commissioning the feeding system.
- Avoid excessive misalignment that may increase wear on the conveying discs.
- Inspect all connecting joints after installation to ensure smooth feed transport.
Manutenzione & Consigli per la pulizia
- Check the internal surface periodically for accumulated feed residue.
- Inspect the corner during scheduled maintenance of the feeding line.
- Verify that the conveying discs move smoothly through the turning section.
- Clean the component whenever the feeding system is serviced to reduce material buildup.
- Replace worn connecting parts if excessive wear is observed during inspection.
Domande frequenti
Can this component be used for system upgrades?
SÌ. It can be installed in new feeding systems or used to replace existing 90-degree corner sections with matching dimensions.
Does the corner affect feed flow?
When correctly installed and aligned, it provides a smooth directional change while allowing continuous movement of the disc chain and feed.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español














