Duck-Bill Nipple Piver dla prosiąt
Providing reliable access to clean drinking water is essential during the nursery phase. The Duck-Bill Nipple Drinker for Piglets is developed for weaned pigs and small nursery animals that require a lower drinking height and moderate water flow.
Manufactured from stainless steel, this drinker is suitable for modern pig production systems where durability, higiena, and ease of installation are important considerations. Its duck-bill style drinking mechanism is commonly used in nursery facilities to support comfortable drinking behavior for young pigs.
Dane techniczne
| Przedmiot | Specyfikacja |
| Nr produktu. | 100105 |
| Tworzywo | 201 Stal nierdzewna / 304 Stal nierdzewna |
| Długość | 65 mm |
| Połączenie | 1/2″ Thread × 3/8″ Body |
| Zalecane ciśnienie wody | 0.1–0,25 MPa (15–36 psi) |
| Zalecane natężenie przepływu | 0.6–1,0 l/min |
| Kategoria świń | Warchlaki / Małe Przedszkole |
| Waga świni | 5–15 kg |
| Zalecana wysokość montażu | 15–25cm (6″–10″) from floor |
| Zalecany kąt montażu | 15°–30° w dół |
Kluczowe funkcje
- Stainless steel construction available in 201 I 304 grades
- Designed specifically for nursery and weaner pigs
- Kompaktowy 65 mm body for easy installation
- Controlled flow rate suitable for young animals
- Standard threaded connection fits common drinking lines
- Suitable for automatic piglet watering systems
Aplikacje rolnicze
- Długopisy dla przedszkolaków
- Weaner accommodation
- Piglet rearing facilities
- Automatyczne systemy do picia
- Komercyjne hodowle trzody chlewnej
Wskazówki dotyczące instalacji
Install the drinker at a downward angle between 15° and 30°.
The recommended mounting height is 15–25 cm from the floor. The final position should allow piglets to activate the drinker naturally without excessive stretching.
Najlepsze rezultaty:
- Flush water lines before installation
- Check all threaded connections
- Verify operating pressure after installation
- Test water flow before introducing animals
Konserwacja & Wskazówki dotyczące czyszczenia
Zalecane praktyki konserwacji obejmują:
- Check drinkers for leakage during routine inspections
- Remove mineral deposits if present
- Clean surrounding areas regularly
- Monitor water flow consistency
- W razie potrzeby wymień zużyte elementy
Routine maintenance is generally simple and helps support long-term service life.
Często zadawane pytania
Jakie ciśnienie wody jest zalecane?
The recommended operating pressure is 0.1–0.25 MPa (15–36 psi).
Jest 304 dostępna stal nierdzewna?
Tak. Obydwa 201 stal nierdzewna i 304 dostępne są wersje ze stali nierdzewnej.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español













