Wsporniki listew dla drobiu
Poultry Slats Support Brackets provide an adjustable connection between PVC support beams and vertical support pipes in raised poultry floor systems. The assemblies use a molded upper beam channel, threaded adjustment section, and base support structure to position and support the floor framework.
Two models are available for W42 × H120 mm and W36 × H90 mm PVC support beams. Both versions use high-impact engineering polypropylene and accept Φ50 mm PVC or steel support pipes. The threaded screw and lock collar allow installers to make fine height adjustments during assembly, which is particularly useful where the supporting surface requires leveling correction.
Dane techniczne
| Kod produktu | 453510 | 453512 |
|---|---|---|
| Opis | Height-Adjustable Plastic Support Leg Assembly | Height-Adjustable Plastic Support Leg Assembly |
| Tworzywo | High-Impact Heavy-Duty Engineering PP | High-Impact Heavy-Duty Engineering PP |
| Kompatybilność wiązki | W42 × H120 mm PVC Beam | W36 × H90 mm PVC Beam |
| Compatible Beam Item | 454501 | 454502 |
| Pipe Receiver | Φ50 mm PVC / Steel Support Pipe | Φ50 mm PVC / Steel Support Pipe |
| Adjustment Mechanism | Threaded Screw & Lock Collar | Threaded Screw & Lock Collar |
| Kolor | Bright Red | Bright Red |
| Aplikacja | Elevated poultry slat floor substructures | H90 mm PVC beam floor systems |
Kluczowe funkcje
- U-shaped beam channel holds the matched PVC beam in position and helps prevent beam rotation.
- Threaded adjustment mechanism allows fine height correction during floor framework installation.
- Triangular base structure provides stable contact with the supporting surface.
- The base includes pre-drilled holes for ground anchoring when required by the installation.
- All-plastic construction avoids rust associated with prolonged contact with manure and moisture.
Aplikacje rolnicze
These support assemblies are commonly used in raised poultry slat floor systems for broilers, warstwy, hodowcy, kaczki, chick brooding areas, and pullet rearing platforms. Model selection should match the PVC beam profile used in the floor substructure.
Wskazówki dotyczące instalacji
Select the correct bracket model according to the PVC support beam profile. Installers typically position the brackets and support pipes first, then adjust the threaded mechanism to level the beam framework before completing the slat floor installation.
Where floor anchoring is required, use the pre-drilled base mounting holes. W rzeczywistości, the complete support layout should be planned according to the floor structure and site conditions.
Konserwacja & Wskazówki dotyczące czyszczenia
Inspect the beam channel, threaded adjustment section, lock collar, and base for accumulated dirt or manure during routine cleaning. Keep the threaded components free from heavy buildup so height adjustments remain accessible when needed.
Check the floor framework periodically to confirm that the matched PVC beams remain properly seated in the support brackets and that anchored base connections remain secure.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español






