Trójkątne wiązki wsporcze do listew świń
Triangular Support Beams for Pig Slats form the structural base beneath plastic slatted flooring in nursery and farrowing facilities. Unlike conventional rectangular supports, the triangular profile encourages manure to move naturally toward both sides of the beam, helping keep the manure pit clear while reducing accumulation around the support structure.
The wide bottom contact surface increases stability on the concrete foundation and provides strong resistance to lateral movement during daily livestock activity. Available in four beam heights, these fiberglass support beams allow farm builders to select an appropriate configuration according to flooring span, manure pit depth, gęstość obsady, and housing type.
They are commonly installed together with plastikowe listwy świńskie to create durable, hygienic flooring systems for modern pig production.
Dane techniczne
| Przedmiot | Specyfikacja |
| Nr produktu. | 155911 / 155912 / 155913 / 155914 |
| Tworzywo | Włókno szklane |
| Profile | Triangular |
| Dostępne wysokości | Wys. 100 mm, Wys. 120 mm, H135 mm, H150 mm |
| Cecha strukturalna | Wide base with high anti-tip stability |
| Manure Flow Design | Triangular profile allows manure to slide naturally to both sides |
| Zalecana aplikacja | Stodoły żłobkowe, porodówki, sow transition areas |
| Recommended Slat Sizes | See matching guide below |
Recommended Matching Plastic Slats
| Beam Height | Recommended Plastic Slats |
| Wys. 100 mm | 600 × 300 mm, 600 × 400 mm |
| Wys. 120 mm | 600 × 400 mm, 600 × 500 mm |
| H135 mm | 600 × 500 mm, 600 × 600 mm |
| H150 mm | 600 × 600 mm (Heavy Duty), 600 × 400 mm (Sow Side) |
Kluczowe funkcje
- Fiberglass construction offers long-term resistance to moisture and typical livestock housing conditions.
- Triangular beam design promotes natural manure movement toward both sides of the manure pit.
- Wide contact surface improves structural stability and helps prevent beam overturning.
- Four beam heights accommodate different manure pit depths and flooring spans.
- Compatible with commonly used plastikowe listwy świńskie in nursery, weaner, and farrowing facilities.
- Simple beam profile allows efficient installation during new construction or floor replacement projects.
Aplikacje rolnicze
Different beam heights support different building layouts and production requirements.
- Wys. 100 mm is typically used in standard nursery pens with shorter flooring spans.
- Wys. 120 mm suits standardized commercial nursery barns and is commonly selected for modern pig farms.
- H135 mm is generally recommended for deeper manure pits or high-density nursery facilities where greater manure storage capacity is required.
- H150 mm is suitable for extra-long spans or sow transition areas where additional structural support is needed.
Selecting the appropriate beam height helps optimize floor stability while matching the structural requirements of the manure pit and plastic flooring system.
Wskazówki dotyczące instalacji
- Install the beams on a level concrete foundation before positioning plastic slats.
- Select the beam height according to manure pit depth, flooring span, and livestock category.
- Match the beam with the recommended slat dimensions to achieve proper floor support.
- Podczas instalacji, maintain consistent beam spacing across the entire flooring system to ensure even load distribution.
- Inspect beam alignment before locking the plastic slats into place.
Konserwacja & Wskazówki dotyczące czyszczenia
- Periodically inspect beams during routine barn maintenance for mechanical damage or movement.
- Remove any debris that may accumulate around the beam base during facility cleaning.
- Check the stability of the supporting foundation if flooring sections are replaced.
- Replace damaged flooring components promptly to maintain proper structural support.
Często zadawane pytania
Can one beam height be used for every pig house?
Not always. Different beam heights are designed for different flooring spans, manure pit depths, and housing layouts. Selecting the correct height improves structural performance.
Are these beams compatible with plastic pig slats?
Tak. Each beam height is recommended for specific plastic slat sizes to provide appropriate floor support.
Why use a triangular beam instead of a flat support?
The triangular profile allows manure to slide naturally toward both sides while the wide base improves stability and resistance to tipping.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español










