Spawany zestaw poideł dla świń
The Welded Pig Waterer Set is a fixed drinking unit used in grower and finisher pig housing systems. It is built for group access, allowing multiple pigs to drink from a single installation point without frequent adjustment or movement of components.
The structure uses 304 stainless steel for both the cup and welded assembly, providing consistent performance in humid and high-ammonia environments.
Dane techniczne
| Przedmiot | Specyfikacja |
| Nr produktu. | 112100 |
| Tworzywo | 304 Stal nierdzewna |
| Cup Size | W 150 x H 260 x D 165 mm |
| Tube Size | 1/2″ X 1.2 metrów |
| Zalecane ciśnienie wody | 0.15 – 0.25 MPa (22 – 36 psi) |
| Docelowa kategoria świń | Hodowcy / Wykańczacze |
| Referencyjna waga świni | 30 – 90 kg |
| Wysokość instalacji (Floor to Rim) | 20 – 25 cm (8″ – 10″) |
| Pojemność świni na miskę | 12 – 15 wieprzowy |
Kluczowe funkcje
- Welded structure reduces loose fittings and leakage points
- 304 stainless steel improves corrosion resistance in slurry environments
- Stable cup geometry supports group drinking behavior
- Kompatybilny ze standardowym 1/2″ farm water supply lines
- Designed for repeated impact from active finishing pigs
- Simple fixed installation for pen-based systems
Aplikacje rolnicze
- Grower and finisher pig housing systems
- Group pens with medium-density stocking
- Fixed drinking points in partitioned barns
- Retrofit upgrades for existing water line layouts
- Manual or semi-automated watering systems
For individual drinking points, combine with a Świński poidło ze sutków in adjacent pens.
Wskazówki dotyczące instalacji
- Install at 20–25 cm from floor to cup rim for grower–finisher pigs
- Ensure water line pressure remains within 0.15–0.25 MPa
- Fix securely to wall or pen partition to avoid movement under load
- Align pipe connection to minimize bending stress on 1/2″ tube
- Flush line before final connection to remove debris from pipes
Konserwacja & Wskazówki dotyczące czyszczenia
- Check water flow weekly to avoid partial blockage
- Inspect welded joints for buildup in high-ammonia zones
- Clean cup surface regularly to reduce biofilm formation
- Ensure stable mounting bolts remain tight under vibration
- Flush water lines during herd turnover or cleaning cycles
Często zadawane pytania
Pytanie 1: Czy to nadaje się do tuczu świń??
Tak, it is designed for pigs weighing 30–90 kg in grower and finisher stages.
Pytanie 2: Can it be used for group drinking?
Tak, each unit supports approximately 12–15 pigs under normal farm conditions.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español









