Drinking Bowl for Sows
In breeding and gestation units, stable water supply directly affects feed intake and reproductive performance. This drinking bowl is developed specifically for sows and gilts, where stronger structural demand and higher water consumption are expected compared to nursery pigs.
The unit uses a welded 304 stainless steel body, which performs well in humid barn environments and under frequent cleaning cycles. Its geometry supports natural drinking posture for larger animals, helping reduce water waste and contamination inside the pen.
Technical Specifications
| Item | Specification |
| Product No. | 111102 |
| Material | 304 Stainless Steel |
| Dimensions | W 210 × H 290 × D 150 mm |
| Recommended Water Pressure | 0.20–0.35 MPa (29–51 psi) |
| Target Swine Category | Sows / Gilts |
| Reference Pig Weight | 110–150 kg |
| Installation Height (Floor to Front Rim) | 30–35 cm (12″–14″) |
| Recommended Capacity | 10–12 Sows per Bowl |
Key Features
- 304 stainless steel construction for long-term corrosion resistance
- Compact bowl geometry suitable for sow and gilt drinking behavior
- Stable performance under typical medium-pressure farm water systems
- Smooth inner surface for easier cleaning and reduced residue buildup
- Designed for high-frequency use in breeding environments
- Supports consistent water intake in group housing systems
- Simple mechanical structure for easy on-farm servicing
Farm Applications
- Gestation sow barns
- Breeding and mating units
- Group sow housing systems
- Gilt development pens
- Commercial pig production facilities
Compared with nursery drinkers, this unit is sized for heavier animals with higher daily water demand. It is typically installed as part of a distributed watering layout to prevent competition at a single drinking point. The Drinking Bowl for Sows is commonly installed alongside a Pig Feeder in sow gestation barns.
Installation Tips
- Install at 30–35 cm height (floor to front rim) based on sow body height
- Ensure 0.20–0.35 MPa water pressure for stable operation
- Fix securely to wall or pen partition with rigid mounting support
- Avoid placement near manure accumulation zones or feed splash areas
- Test water flow after installation to confirm consistent discharge
Maintenance & Cleaning Tips
- Flush bowl daily or during routine barn cleaning cycles
- Remove feed particles or bedding debris from bowl area
- Inspect stainless steel surface for buildup or scratches
- Check water inlet for clogging or leakage
- Verify mounting stability during herd rotation cycles
The stainless steel structure allows standard high-pressure washing used in modern pig units.
FAQ
Can this bowl be used for finishing pigs?
It is not recommended. This model is designed for sows and gilts weighing 110–150 kg.
What is the recommended installation height?
Install at 30–35 cm from floor to front rim.
How many sows per bowl are recommended?
Typical design allows 10–12 sows per bowl depending on pen layout.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español











