Poultry Water System Pressure Regulator
The Poultry Water System Pressure Regulator is a pressure control component designed for automatic poultry drinking systems. It regulates water pressure supplied to nipple drinking lines, helping maintain consistent water delivery for different poultry house layouts and production stages.
The regulator uses a high-grade engineering plastic body with a signal red finish for easy identification during installation and maintenance. Its adjustable pressure range of 0.1–0.6 MPa allows operators to match water supply conditions with different drinking line requirements.
The unit includes a quick-switch regulating knob for standard drinking mode and back-flushing operation. The transparent sight tube allows farm workers to check water pressure conditions visually, while the included adapters support connection with common poultry drinking pipe configurations.
Technical Specifications
| Specification | Details |
| Product Code | 410502 |
| Material | High-Grade Engineering Plastic |
| Color | Signal Red |
| Regulator Unit Dimensions | 220 × 250 mm |
| Pressure Regulation Range | 0.1–0.6 MPa (1.0–6.0 bar / 14.5–87 PSI) |
| Pipe Connection Compatibility | 25mm round PVC water pipe / 22×22mm square water pipe |
| Target Livestock | Broilers, Layers, Ducks, Geese, Rabbits, Pigeons, Quails |
Key Features
- Dual operating modes for drinking and flushing
The regulator includes a quick-switch regulating knob that allows operators to change between normal low-pressure drinking water supply and higher-pressure back-flushing operation for cleaning the water line. - Adjustable water pressure control
The bottom pressure adjustment knob allows fine pressure adjustment according to drinking line length, house layout, and livestock requirements. - Visual water level inspection
The transparent sight tube provides a direct view of water pressure conditions, helping farm workers perform routine checks more efficiently. - Compatible with common poultry pipelines
The regulator includes dedicated inlet and outlet fittings for connection with standard round or square PVC nipple drinking pipes. - Complete component package
The package includes the regulator body, sight tube, quick-connect outlet adapters, and threaded wing nuts for installation.
Farm Applications
The Poultry Water System Pressure Regulator is commonly installed in automatic poultry drinking systems where stable water pressure control is required.
Typical applications include:
- Broiler drinking lines
- Layer house nipple drinking systems
- Duck and goose drinking systems
- Quail and pigeon water supply systems
- Rabbit automatic drinking systems
- Multi-section poultry houses with different water demand zones
Stable pressure control helps poultry drinking nipples provide consistent water delivery during different growth stages.
Installation Tips
- Install the regulator at a position that allows easy access for pressure adjustment and inspection.
- Confirm the pipe connection size before installation to match the existing poultry drinking system.
- Connect inlet and outlet pipes according to the water flow direction marked on the regulator.
- Adjust the pressure gradually after installation and check nipple drinker operation throughout the drinking line.
- During back-flushing operation, ensure the water supply system can provide sufficient flow according to the pipeline design.
Maintenance & Cleaning Tips
- Inspect the transparent sight tube regularly and clean it if dirt or deposits affect visibility.
- Check pipe connections and fittings for leakage during routine farm maintenance.
- Flush the drinking system periodically according to farm water quality conditions.
- Avoid using cleaning methods or chemicals that may damage engineering plastic components.
- Verify pressure settings after cleaning or system adjustment.
FAQ
What water pressure range can this regulator control?
The regulator supports a pressure adjustment range of 0.1–0.6 MPa (1.0–6.0 bar / 14.5–87 PSI).
Can this regulator be used for both round and square poultry pipes?
Yes. The unit is designed for connection with standard 25mm round PVC water pipes and 22×22mm square poultry water pipes.
What is the purpose of the back-flushing mode?
The back-flushing mode increases water flow conditions to help remove deposits or remaining particles from poultry drinking lines during system cleaning.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español







