Stainless Steel 90° Corner for Pig Feeding System
The Stainless Steel 90° Corner for Pig Feeding System is a routing component used in automatic pig feeding systems where the feed pipeline needs to change direction. It allows the disc chain to pass through a 90-degree turn while maintaining continuous feed transport.
Manufactured from 304 stainless steel, the corner provides good resistance to moisture, feed dust, and daily cleaning conditions commonly found in pig houses. It is designed for compatibility with Ø60 mm disc feeding line systems and can be integrated into new installations or replacement projects.
This component is commonly used when feed lines must follow the building layout around walls, columns, or equipment while maintaining an efficient feeding route.
Technical Specifications
| Item | Specification |
| Product No. | 143101 |
| Material | 304 Stainless Steel |
| Dimensions | L 350 × W 350 mm |
| Geometry | 90° Angle |
| Compatible Feeding Line | Ø60 mm Disc Feeding System |
Key Features
- Manufactured from 304 stainless steel for long-term corrosion resistance.
- Designed specifically for Ø60 mm disc feeding systems.
- Provides a smooth 90-degree transition for disc chain movement.
- Supports flexible routing in automatic feeding installations.
- Suitable for both new system construction and replacement of existing corner sections.
- Simple structure with minimal maintenance requirements.
Farm Applications
- Sow barns
- Gestation houses
- Farrowing units
- Nursery pig houses
- Grower and finisher buildings
- Feed lines installed around structural columns or building corners
A complete feeding line also includes a properly matched Drive Unit for Pig Feeding System.
Installation Tips
- Confirm compatibility with Ø60 mm feeding pipes before installation.
- Install the corner section securely to maintain proper alignment with adjacent pipe sections.
- Ensure the disc chain moves freely through the corner before commissioning the feeding system.
- Avoid excessive misalignment that may increase wear on the conveying discs.
- Inspect all connecting joints after installation to ensure smooth feed transport.
Maintenance & Cleaning Tips
- Check the internal surface periodically for accumulated feed residue.
- Inspect the corner during scheduled maintenance of the feeding line.
- Verify that the conveying discs move smoothly through the turning section.
- Clean the component whenever the feeding system is serviced to reduce material buildup.
- Replace worn connecting parts if excessive wear is observed during inspection.
FAQ
Can this component be used for system upgrades?
Yes. It can be installed in new feeding systems or used to replace existing 90-degree corner sections with matching dimensions.
Does the corner affect feed flow?
When correctly installed and aligned, it provides a smooth directional change while allowing continuous movement of the disc chain and feed.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español














