Welded Pig Waterer Set
The Welded Pig Waterer Set is a fixed drinking unit used in grower and finisher pig housing systems. It is built for group access, allowing multiple pigs to drink from a single installation point without frequent adjustment or movement of components.
The structure uses 304 stainless steel for both the cup and welded assembly, providing consistent performance in humid and high-ammonia environments.
Technical Specifications
| Item | Specification |
| Product No. | 112100 |
| Material | 304 Stainless Steel |
| Cup Size | W 150 x H 260 x D 165 mm |
| Tube Size | 1/2″ x 1.2 meters |
| Recommended Water Pressure | 0.15 – 0.25 MPa (22 – 36 psi) |
| Target Swine Category | Growers / Finishers |
| Reference Pig Weight | 30 – 90 kg |
| Installation Height (Floor to Rim) | 20 – 25 cm (8″ – 10″) |
| Pig Capacity per Bowl | 12 – 15 pigs |
Key Features
- Welded structure reduces loose fittings and leakage points
- 304 stainless steel improves corrosion resistance in slurry environments
- Stable cup geometry supports group drinking behavior
- Compatible with standard 1/2″ farm water supply lines
- Designed for repeated impact from active finishing pigs
- Simple fixed installation for pen-based systems
Farm Applications
- Grower and finisher pig housing systems
- Group pens with medium-density stocking
- Fixed drinking points in partitioned barns
- Retrofit upgrades for existing water line layouts
- Manual or semi-automated watering systems
For individual drinking points, combine with a Pig Nipple Drinker in adjacent pens.
Installation Tips
- Install at 20–25 cm from floor to cup rim for grower–finisher pigs
- Ensure water line pressure remains within 0.15–0.25 MPa
- Fix securely to wall or pen partition to avoid movement under load
- Align pipe connection to minimize bending stress on 1/2″ tube
- Flush line before final connection to remove debris from pipes
Maintenance & Cleaning Tips
- Check water flow weekly to avoid partial blockage
- Inspect welded joints for buildup in high-ammonia zones
- Clean cup surface regularly to reduce biofilm formation
- Ensure stable mounting bolts remain tight under vibration
- Flush water lines during herd turnover or cleaning cycles
FAQ
Q1: Is this suitable for finishing pigs?
Yes, it is designed for pigs weighing 30–90 kg in grower and finisher stages.
Q2: Can it be used for group drinking?
Yes, each unit supports approximately 12–15 pigs under normal farm conditions.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español











