Привод для системы кормления свиней

Привод для цепной автоматической системы кормления свиней

The drive unit for pig feeding system from StoutAgri serves as the core power component for automated pig feeding lines. It delivers consistent, stable force to move feed smoothly across long‑distance pipelines, cuts down manual labor, lowers feed waste, and supports reliable daily operation for commercial pig farms of all sizes.

Product introduction

This drive unit is purpose‑built for modern pig farming automation. It uses high‑performance three‑phase motors to maintain steady torque and low noise during daily use. Operators can pick voltage and power configurations that fit their on‑site power supply, so the unit integrates easily with existing feeding equipment. The housing uses corrosion‑resistant stainless steel to withstand humid, dusty barn environments and extend service life. A built‑in travel switch adds safety and control precision for automatic start, stop, and protection.

Спецификации продукта

Motor Type	Номинальное напряжение	Frequency	Власть	Housing Material	Max Horizontal Conveying Distance
Three‑phase	220В / 380В	50–60Hz	1.5Kw / 2.2Kw	201 Нержавеющая сталь / 304 Нержавеющая сталь	Up to 200m (8 corners)

Особенности продукта

• It adopts a high‑quality three‑phase motor for strong output, stable running, and long service life.
• Voltage and power are flexible: you can choose 220V or 380V, 50–60Hz, 1.5Kw or 2.2Kw based on on‑site needs.
• A travel switch comes standard for safe, automatic operation and effective equipment protection.
• Two housing options are available: 201 stainless steel and 304 нержавеющая сталь, both corrosion‑resistant and easy to clean.
• It supports a maximum horizontal conveying distance up to 200 метры, including up to 8 corner sections.

Монтаж

1. Choose a flat, firm mounting position near the feeding pipeline to keep alignment accurate.
2. Bolt the drive unit securely to the floor or support frame to avoid shaking during operation.
3. Connect the unit to the feeding pipe and tighten all joints to prevent leaks or jams.
4. Wire the motor properly according to your selected voltage standard, and test the travel switch before full‑time use.
5. После сборки, run a short dry test to confirm smooth rotation and correct direction.

Обслуживание

1. Check the motor and mounting bolts every week to keep them tight and secure.
2. Lubricate moving parts monthly to reduce friction and extend component life.
3. Keep the travel switch clean and free of dust or feed dust to maintain reliable triggering.
4. Wipe the stainless steel housing regularly to remove moisture and dirt, and prevent corrosion.
5. Inspect the drive chain or connection parts monthly; replace worn components promptly to avoid downtime.
6. Store the unit in a dry, ventilated area if not in use for an extended period.