Ниппельная поилка для птицы из круглых труб
The Poultry Nipple Drinker for Round Pipes is a clamp-on drinking component designed for автоматические системы поения птицы installed with Ø25mm round PVC pipes. The drinker delivers controlled water flow when birds activate the stainless steel trigger pin, supporting clean and efficient drinking management in commercial poultry houses.
The drinker uses a plastic saddle body with a 304 stainless steel nipple trigger pin to withstand regular operation in poultry environments. Its dynamic flow range supports different production stages, providing lower flow rates for chicks and higher flow rates for adult birds.
The saddle clamp design allows direct installation on round water pipes. Farmers can drill the required mounting hole and secure the drinker onto the pipe without complex connections, making it suitable for new drinking line installation and system maintenance.
Технические характеристики
| Спецификация | Подробности |
| Код продукта | 400501 |
| Тип продукта | Ниппельная поилка для птицы с зажимом |
| Материал | Plastic Saddle Body, 304 Stainless Steel Nipple Trigger Pin |
| Варианты цвета | White Saddle Clamp, Настраивается по запросу |
| Совместимая система труб | Ø25mm Round PVC Water Line Pipes |
| Производительность | 30–120 мл/мин |
| Flow Rate for Chicks | 30–50 ml/min |
| Flow Rate for Adult Birds | 80–120 мл/мин |
| Целевой скот | Бройлеры, Слои, Заводчики, Утки, Перепела |
| Емкость / Покрытие | 8–12 Broilers/Chicks or 6–8 Adult Layers per Drinker |
| Способ установки | Saddle Clamp-On Installation |
Ключевые особенности
- Designed for round PVC water lines
The drinker fits Ø25mm round PVC poultry drinking pipes and supports common automatic drinking system layouts. - 304 stainless steel trigger pin
The stainless steel trigger pin provides a durable contact surface for repeated bird activation during daily drinking operations. - Dynamic water flow adjustment
The 30–120 ml/min flow range supports different poultry stages, from young chicks to adult birds. - Simple clamp installation
The saddle clamp structure allows installation by drilling a Ø9.5mm hole on the water pipe and snapping the clamp into position. - Подходит для нескольких видов домашней птицы.
The drinker can be used in broiler, слой, заводчик, утка, and quail production systems.
Фермерские приложения
The Poultry Nipple Drinker for Round Pipes is commonly used in automatic drinking systems for commercial poultry farms.
Типичные области применения включают в себя:
- Бройлерные птичники
- Многослойные дома
- Племенные фермы
- Duck houses
- Quail production facilities
The drinker is generally installed along suspended or fixed drinking lines where farms use round PVC water pipes. It can be combined with other drinking system components, including water pressure regulators, drinking line fittings, and water supply equipment.
Советы по установке
- Confirm that the drinking line uses Ø25mm round PVC water pipe перед установкой.
- Drill a Ø9.5mm hole at the required drinking point.
- Clean drilling debris from inside the pipe before mounting the drinker.
- Install the saddle clamp evenly around the pipe to prevent leakage.
- Test the water flow after installation and adjust the system pressure according to bird requirements.
Обслуживание & Советы по очистке
- Inspect nipple drinkers regularly for leakage or reduced water flow.
- Check the stainless steel trigger pin for feed residue or mineral buildup.
- Периодически промывайте линию поения в соответствии с санитарными процедурами фермы..
- Replace damaged saddle clamps or drinker components when necessary.
- Monitor water pressure to maintain stable operation across the complete drinking line.
Часто задаваемые вопросы
What pipe size does this nipple drinker fit?
Эта модель предназначена для Ø25mm round PVC water line pipes.
Can this drinker be used for both chicks and adult birds?
Да. The drinker provides different practical flow ranges, typically 30–50 ml/min for chicks and 80–120 ml/min for adult birds.
How is the drinker installed on the pipe?
The drinker uses a saddle clamp design. Farmers drill a Ø9.5mm hole on the pipe and snap the clamp into place.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español






