Ocynkowany narożnik do systemu karmienia świń
The Ocynkowany narożnik do systemu karmienia świń is a key routing component used to change the direction of feed transport within automatic pig feeding lines. Installed where the conveying pipeline turns 90 degrees, it guides the disc chain through the corner while maintaining continuous feed movement.
The housing is manufactured from galvanized steel to provide structural strength for demanding livestock environments. Inside the unit, a cast iron guide wheel supports stable disc movement through the turning section. An integrated sealing strip helps reduce feed leakage and minimizes the entry of dust and debris into the housing.
Designed for Ø60 mm disc feeding systems, this corner section is suitable for sow farms, oddziały żłobkowe, and grow-finish operations where flexible pipeline routing is required.
Dane techniczne
| Przedmiot | Specyfikacja |
| Nr produktu. | 143401 |
| Materiał obudowy | Stal ocynkowana |
| Materiał koła prowadzącego | Lane żelazo |
| Wymiary | L 350 × W 350 mm |
| Geometry | 90° Angle |
| Kompatybilna linia karmienia | System podawania dysków Ø60 mm |
| Seal | Integrated Sealing Strip |
Kluczowe funkcje
- Galvanized steel housing provides durability for long-term farm operation.
- Cast iron guide wheel supports smooth disc chain movement through the turning section.
- Integrated sealing strip helps reduce feed leakage and protects internal components.
- Designed specifically for Ø60 mm disc feeding systems.
- Allows flexible pipeline routing around building corners and structural obstacles.
- Suitable for both new installations and maintenance replacement.
Aplikacje rolnicze
This corner unit is used wherever an automatic feeding line requires a 90-degree directional change.
Typowe zastosowania obejmują:
- Sow housing
- Stodoły ciążowe
- Porodówki
- Nursery facilities
- Obory dla hodowców i tuczników
- Feed lines routed around walls, support columns, or equipment layouts
A properly matched Jednostka napędowa systemu karmienia świń provides the power required for continuous feed conveying throughout the line.
Wskazówki dotyczące instalacji
- Confirm compatibility with Ø60 mm disc feeding pipes before installation.
- Position the corner accurately to maintain proper alignment with adjacent pipe sections.
- Ensure the guide wheel rotates freely before operating the feeding line.
- Check that the sealing strip is correctly seated to help minimize feed leakage.
- Po instalacji, run the disc chain through the system to verify smooth movement around the corner.
Konserwacja & Wskazówki dotyczące czyszczenia
- Remove accumulated feed residue during scheduled system cleaning.
- Inspect the cast iron guide wheel for smooth rotation.
- Check the sealing strip regularly and replace it if excessive wear is observed.
- Verify that connecting bolts remain securely tightened.
- During routine feeding system maintenance, inspect the corner for wear caused by long-term chain operation.
Często zadawane pytania
Which feeding systems is this corner compatible with?
It is designed for Systemy podawania dysków Ø60 mm.
What is the purpose of the sealing strip?
The integrated sealing strip helps reduce feed leakage while limiting dust and debris from entering the housing.
Why is the guide wheel made from cast iron?
Cast iron provides the strength and durability required to guide the moving disc chain under continuous operation.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español














