Narożnik 90° ze stali nierdzewnej do systemu karmienia świń
The Stainless Steel 90° Corner for Pig Feeding System is a routing component used in automatic pig feeding systems where the feed pipeline needs to change direction. It allows the disc chain to pass through a 90-degree turn while maintaining continuous feed transport.
Wyprodukowano z 304 stal nierdzewna, the corner provides good resistance to moisture, feed dust, and daily cleaning conditions commonly found in pig houses. It is designed for compatibility with Ø60 mm disc feeding line systems and can be integrated into new installations or replacement projects.
This component is commonly used when feed lines must follow the building layout around walls, kolumny, or equipment while maintaining an efficient feeding route.
Dane techniczne
| Przedmiot | Specyfikacja |
| Nr produktu. | 143101 |
| Tworzywo | 304 Stal nierdzewna |
| Wymiary | L 350 × W 350 mm |
| Geometry | 90° Angle |
| Kompatybilna linia karmienia | System podawania dysków Ø60 mm |
Kluczowe funkcje
- Wyprodukowano z 304 stainless steel for long-term corrosion resistance.
- Designed specifically for Ø60 mm disc feeding systems.
- Provides a smooth 90-degree transition for disc chain movement.
- Supports flexible routing in automatic feeding installations.
- Suitable for both new system construction and replacement of existing corner sections.
- Simple structure with minimal maintenance requirements.
Aplikacje rolnicze
- Sow barns
- Gestation houses
- Jednostki porodowe
- Przedszkola dla świń
- Grower and finisher buildings
- Feed lines installed around structural columns or building corners
A complete feeding line also includes a properly matched Jednostka napędowa for Pig Feeding System.
Wskazówki dotyczące instalacji
- Confirm compatibility with Ø60 mm feeding pipes before installation.
- Install the corner section securely to maintain proper alignment with adjacent pipe sections.
- Ensure the disc chain moves freely through the corner before commissioning the feeding system.
- Avoid excessive misalignment that may increase wear on the conveying discs.
- Inspect all connecting joints after installation to ensure smooth feed transport.
Konserwacja & Wskazówki dotyczące czyszczenia
- Check the internal surface periodically for accumulated feed residue.
- Inspect the corner during scheduled maintenance of the feeding line.
- Verify that the conveying discs move smoothly through the turning section.
- Clean the component whenever the feeding system is serviced to reduce material buildup.
- Replace worn connecting parts if excessive wear is observed during inspection.
Często zadawane pytania
Can this component be used for system upgrades?
Tak. It can be installed in new feeding systems or used to replace existing 90-degree corner sections with matching dimensions.
Does the corner affect feed flow?
When correctly installed and aligned, it provides a smooth directional change while allowing continuous movement of the disc chain and feed.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español














