Poidło smoczkowe do drobiu do rur okrągłych
The Poultry Nipple Drinker for Round Pipes is a clamp-on drinking component designed for automatic poultry water systems installed with Ø25mm round PVC pipes. The drinker delivers controlled water flow when birds activate the stainless steel trigger pin, supporting clean and efficient drinking management in commercial poultry houses.
The drinker uses a plastic saddle body with a 304 stainless steel nipple trigger pin to withstand regular operation in poultry environments. Its dynamic flow range supports different production stages, providing lower flow rates for chicks and higher flow rates for adult birds.
The saddle clamp design allows direct installation on round water pipes. Farmers can drill the required mounting hole and secure the drinker onto the pipe without complex connections, making it suitable for new drinking line installation and system maintenance.
Dane techniczne
| Specyfikacja | Bliższe dane |
| Kod produktu | 400501 |
| Typ produktu | Clamp-On Poultry Nipple Drinker |
| Tworzywo | Plastic Saddle Body, 304 Stainless Steel Nipple Trigger Pin |
| Opcje kolorów | White Saddle Clamp, Customizable upon request |
| Compatible Pipe System | Ø25mm Round PVC Water Line Pipes |
| Flow Rate Capacity | 30–120 ml/min |
| Flow Rate for Chicks | 30–50 ml/min |
| Flow Rate for Adult Birds | 80–120 ml/min |
| Celuj w zwierzęta gospodarskie | Brojlery, Warstwy, Breeders, Kaczki, Przepiórki |
| Pojemność / Coverage | 8–12 Broilers/Chicks or 6–8 Adult Layers per Drinker |
| Metoda instalacji | Saddle Clamp-On Installation |
Kluczowe funkcje
- Designed for round PVC water lines
The drinker fits Ø25mm round PVC poultry drinking pipes and supports common automatic drinking system layouts. - 304 stainless steel trigger pin
The stainless steel trigger pin provides a durable contact surface for repeated bird activation during daily drinking operations. - Dynamic water flow adjustment
The 30–120 ml/min flow range supports different poultry stages, from young chicks to adult birds. - Simple clamp installation
The saddle clamp structure allows installation by drilling a Ø9.5mm hole on the water pipe and snapping the clamp into position. - Nadaje się do wielu gatunków drobiu
The drinker can be used in broiler, warstwa, breeder, kaczka, and quail production systems.
Aplikacje rolnicze
The Poultry Nipple Drinker for Round Pipes is commonly used in automatic drinking systems for commercial poultry farms.
Typowe zastosowania obejmują:
- Kurniki dla brojlerów
- Layer houses
- Breeder farms
- Duck houses
- Quail production facilities
The drinker is generally installed along suspended or fixed drinking lines where farms use round PVC water pipes. It can be combined with other drinking system components, including water pressure regulators, drinking line fittings, and water supply equipment.
Wskazówki dotyczące instalacji
- Confirm that the drinking line uses Ø25mm round PVC water pipe before installation.
- Drill a Ø9.5mm hole at the required drinking point.
- Clean drilling debris from inside the pipe before mounting the drinker.
- Install the saddle clamp evenly around the pipe to prevent leakage.
- Test the water flow after installation and adjust the system pressure according to bird requirements.
Konserwacja & Wskazówki dotyczące czyszczenia
- Inspect nipple drinkers regularly for leakage or reduced water flow.
- Check the stainless steel trigger pin for feed residue or mineral buildup.
- Flush the drinking line periodically according to farm sanitation procedures.
- Replace damaged saddle clamps or drinker components when necessary.
- Monitor water pressure to maintain stable operation across the complete drinking line.
Często zadawane pytania
What pipe size does this nipple drinker fit?
Model ten przeznaczony jest dla Ø25mm round PVC water line pipes.
Can this drinker be used for both chicks and adult birds?
Tak. The drinker provides different practical flow ranges, typically 30–50 ml/min for chicks and 80–120 ml/min for adult birds.
How is the drinker installed on the pipe?
The drinker uses a saddle clamp design. Farmers drill a Ø9.5mm hole on the pipe and snap the clamp into place.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español





