Set di acqueer saldato
The Welded Pig Waterer Set is a fixed drinking unit used in grower and finisher pig housing systems. It is built for group access, allowing multiple pigs to drink from a single installation point without frequent adjustment or movement of components.
The structure uses 304 stainless steel for both the cup and welded assembly, providing consistent performance in humid and high-ammonia environments.
Specifiche tecniche
| Articolo | Specifiche |
| Prodotto n. | 112100 |
| Materiale | 304 Acciaio inossidabile |
| Dimensione della tazza | W 150 xH 260 xD 165 mm |
| Tube Size | 1/2″ X 1.2 metri |
| Pressione dell'acqua consigliata | 0.15 – 0.25 MPa (22 – 36 psi) |
| Categoria suina target | Coltivatori / Finitori |
| Peso del maiale di riferimento | 30 – 90 kg |
| Altezza di installazione (Floor to Rim) | 20 – 25 cm (8″ – 10″) |
| Capacità di maiale per ciotola | 12 – 15 maiali |
Caratteristiche principali
- Welded structure reduces loose fittings and leakage points
- 304 stainless steel improves corrosion resistance in slurry environments
- Stable cup geometry supports group drinking behavior
- Compatibile con lo standard 1/2″ farm water supply lines
- Designed for repeated impact from active finishing pigs
- Simple fixed installation for pen-based systems
Applicazioni agricole
- Grower and finisher pig housing systems
- Group pens with medium-density stocking
- Fixed drinking points in partitioned barns
- Retrofit upgrades for existing water line layouts
- Manual or semi-automated watering systems
For individual drinking points, combine with a Abbeveratoio per capezzoli di maiale in adjacent pens.
Suggerimenti per l'installazione
- Install at 20–25 cm from floor to cup rim for grower–finisher pigs
- Ensure water line pressure remains within 0.15–0.25 MPa
- Fix securely to wall or pen partition to avoid movement under load
- Align pipe connection to minimize bending stress on 1/2″ tube
- Flush line before final connection to remove debris from pipes
Manutenzione & Consigli per la pulizia
- Check water flow weekly to avoid partial blockage
- Inspect welded joints for buildup in high-ammonia zones
- Clean cup surface regularly to reduce biofilm formation
- Ensure stable mounting bolts remain tight under vibration
- Flush water lines during herd turnover or cleaning cycles
Domande frequenti
Q1: È adatto per la rifinizione dei suini?
SÌ, it is designed for pigs weighing 30–90 kg in grower and finisher stages.
Q2: Can it be used for group drinking?
SÌ, each unit supports approximately 12–15 pigs under normal farm conditions.

English
العربية
中文(简体)
Français
Deutsch
Italiano
Polski
Português
Русский
Español











